电站毕业论文电站T92钢性能及焊接技术综述--170607169.docVIP

毕业论文 题目:电站T92钢性能及焊接技术综述 摘要 采用ERNiCr-3和ERNiCrMo-3两种镍基焊丝,用气体保护钨极电弧焊(GTAW)法实现T92/HR3C异种钢管焊接。研究了接头的显微组织及其力学性能,以及焊后热处理对接头组织结构及力学性能的影响等。结果表明:T92/HR3C异种钢接头焊缝为胞状树枝晶组织,T92侧热影响区(HAZ)主要由过热区、粗晶区及细晶区构成;HR3C侧HAZ没有明显晶粒长大的现象,但晶界、晶内有碳、氮化物析出。ERNiCrMo-3焊接接头的强度、塑性及硬度较高,拉伸断裂位于母材;而ERNiCr-3焊接接头强度、硬度较低,但冲击韧性较高,拉伸断裂位于焊缝。760℃、30 min焊后热处理,有助于改善两种焊接接头的综合力学性能。 Using ERNiCr-3 and ERNiCrMo-3 two nickel based welding, gas tungsten arc welding ( GTAW ) method to achieve T92 / HR3C dissimilar steel welding. Study of joint microstructure and mechanical properties, as well as the heat treatment after welding on the m