全自动端面磨刀机.docVIP

全自动端面磨刀机DMSQ-C型系列 Automatic Grinder DMSQ-C type? 全自动端面磨刀机DMSQ-C型系列，是我公司集德国磨刀机技术的基础上，研制而成的第四代全自动可调速的磨刀机。 全自动端面磨刀机DMSQ-C型系列采用优质碳素结构钢，加工而成的龙门式结构机身；磨头传动方式为滚动式直线导轨传动；冷却水由砂轮中间喷出 水冷电机专利技术 ，使冷却效果更好；磨头运动和砂轮转速均采用进口变频器控制，速度在规定范围内任意可调。 砂轮自动进给磨刀，磨头采用粘贴式筒式砂轮, 提高了砂轮使用寿命的1/3，极大的降低了磨刀成本，且磨头前后移动可调。 全自动端面磨刀机DMSQ-C型系列适用于刃磨各种板条状直面刀片 如：联动线刀、卫生纸刮刀、三面切书机、切纸机、木材削片机、剪板机等所用的刀片 ；是印刷、造纸、木工、塑革、造板等行业的理想刃磨设备。 全自动端面磨刀机DMSQ-C型系列是磨刀中心的最佳选择。 Automatic Face Grinder DMSQ-C type, the company is set on the basis of the German Grinding technology, developed from the fourth generation of fully automatic adjustable speed knife grinder. This type of sharpener made of high quality carbon structural steel, processed from the gantry structure of the fuselage; grinding Transmission rolling linear guides for the transmission; the middle of the cooling water ejected from the grinding wheel water-cooled motor patented technology , the cooling Better; grinding head movement and wheel speed are imported inverter control, the speed is adjustable within the specified scope. Automatic feed grinding wheel, grinding head with paste-type cylindrical grinding wheel, grinding wheel life increased to 1 / 3, which greatly reduces the cost of grinding and grinding back and forth adjustable. This type of sharpener for sharpening the blade to face all kinds of lath such as: joint line knife, toilet paper scraper, three-side trimmer, cutter, wood chipper, cutting blades used in such ; is Printing, paper, wood, plastic leather, creating an ideal board grinding equipment and other industries. Automatic Face Grinder DMSQ-C type, the best choice for sharpening center. 全自动端面磨刀机DMSQ-C型系列设备结构特点/技术参数 Main function and Technical parameters ● 水冷电机磨头：德东Y系列三相异步电动机 ● 磨头可以前后移动 ● 默认最大磨刀宽度： 以22°为准300 mm ● 变频器调速（行程移动） ● 砂轮自动进给 ● 链轮链条传动 ● 龙门式机身 ● 电磁吸盘刀架台 ● 涡轮蜗杆刀架传动 ● 工作台旋转角度：0～±90度 全自动端面磨刀机DMSQ-C型系列主要功能配置（节选） Main Function Deployment excerpt ● 滚动式定位直线导轨 ● 集中加油装置 ● 进口电器元件（选配装置） ● 刮刀夹具（选配装置） 全自动端面磨刀机DMSQ-C型系列主要技术参数 Main technical parameters 砂轮