电池测试系统设计仿真_学士学位毕业论文.doc

电池测试系统设计与仿真 摘要 本文通过对锂离子电池测试系统的分析，提出了一种基于Simulink的电池测试系统的设计，此系统中包括对电池测试系统的硬件设计与分析、Simulink环境下的电池放电测试电路模型建立与仿真，最终实现对电池测试系统的设计。 测试系统的硬件是以LPC2138为处理核心，采用PWM对电池充放电过程中的电流进行控制，设计了电池充放电电路，在硬件设计中还完成了电池电压、电流信号采集电路，信号调理电路等设计。 本文还介绍了Simulink仿真环境，其中包括Simulink仿真如何建立、S-函数的应用、根据测试电路模型建立Simulink仿真模型，通过对仿真模型的分析，可以实现对锂离子电池测试系统的仿真研究，得出仿真波形。 随着科技的进步与锂离子电池工业的迅速发展，随锂离子电池的质量也提出了更高的要求，国内外都把锂离子电池的检测提到了一个及其重要的地位。锂离子电池的质量直接影响着电子产品的稳定性、可靠性。一个高效、稳定、精确、可靠的锂离子电池测试设备具有非常重要的意义。 关键词　锂离子电池；Simulink仿真；电池测试Battery test system design and simulation Abstract In this paper, through the analysis of the lithium ion battery testing system, puts forward a kind of the design of the battery test system based on Simulink, the system includes the battery test system hardware design and analysis, under the environment of Simulink battery discharge test circuit modeling and simulation, finally realizes the design of the battery test system. Test system hardware based on LPC2138 as the processing core, adopts PWM to control the battery in the process of charging and discharging current, battery charging and discharging circuit was designed, in the hardware design is completed the battery voltage, current signal acquisition circuit, signal modulation circuit design, etc. Simulink simulation environment is also introduced in this paper, including the Simulink simulation and how to set up, the application of S-function, according to the circuit testing model is established in Simulink simulation model, through the analysis of the simulation model, can implement the simulation research of lithium ion battery test system, obtained the simulation waveform. With the progress of science and technology and the rapid development of the lithium ion battery industry, along with the lithium ion battery quality also put forward higher request, both at home and abroad with the lithium ion battery testing mentioned a and its important position. The quality of the lithium ion battery directly affects the stability and reliabili