EDA英文练习习题册.doc

Part one 1-1 Choices.（Choose the correct statement） 1.Large logical programmable devices can be cataloged as two types according to structure, which of the following is correct? _D___ A．FPGA and IP B．SOPC and CPLD C．GAL and CPLD D． FPGA and CPLD 2. According to the EDA design flowchart, which of the following sequence of simulating is correct? ____ ①Timing Simulation ②Behavior simulation ③Logic simulation synthesis ④Function simulation A．①②③④ B．②①④③ C．④③②① D．②④③① 3. Which of the following is Embedded IP from ALTERA? ____. A.PicoBlaze,MicroBlaze/PowerPC 405 B. DSP C. PAC D. Nios/ARM 4. Which of the following description about the block diagram/schematic file is correct? _ A. Suitable to design large logical digital system design B.A design flowchart from bottom to top C. Functional Design D. Can’t describe hardware in different level in digital system design 5. Which of the following description about the process clause in VHDL is incorrect? ___ A. Process is a clause cycled forever B. Process begins as the sensitive signal changing C. Variable defined in the process can’t be used in other process D. Process includes description part, concurrent clauses and sensitive table 6. Which of the following description about signal and variable is incorrect? ______. A..Signal is a local data used only in the process B. Assignment in the process Validates immediately C. Scope of the signal is inter block process D. Value Assignment with different symbol 7. Which of the following description about CPLD is correct? _____. A. XC9500 family devices from XILINX are CPLD B. CPLD is abbreviation of field programmable generic array C. CPLD is early extended from FPGA D. CPLD is based on look out table (LUT) 8. Which of the following library is defined by current user?_____ A．IEEE library B．VITAL library C．STD library D．WORK library 9. Which of the following number is correct? A．10#1E8# B．16#E#E1 C．74HC124 D．X_16 10. Which