MIPI简介.ppt

MIPI Introduction billy * MIPI Introduction Contents What is MIPI? D-PHY construction features MIPI data transmission DSICSI application * MIPI Introduction MIPI： Mobile Industry Processor Interface MIPI Alliance is a collaboration of mobile industry leaders. Objective to promote open standards for interfaces to mobile application processors. MIPI Spec： DCS—Display Command Set DBI--Display Bus Interface DPI--Display Pixel Interface DSI--Display Serial Interface CSI--Camera Serial Interface D-PHY * MIPI Introduction MIPI Features Low power Dynamic adjustable low-power consumption (LP) and high speed (HS) data model and low signal swing 。 High speed Each channel can reach to 500~1000Mbps Low cost PHY EMI * MIPI Introduction MIPI compare to other differential signal swing. TMDS: Transition Minimized Differential signal LVDS: Low-Voltage Differential Signaling * D-PHY D-PHY (Physical Layer) ： D-PHY provide the DSI (display serial interface) and CSI (camera serial interface) in the physical definition. D-PHY describes the source synchronous high speed(HS), low power consumption (LP) of the physical layer. D-PHY data transfer rate is not fixed, 500 ~1000 Mbit/s. PHY Configuration： A clock channel One or more data channels 　　 * D-PHY D-PHY 3 types main channels： Single-track clock Single-track data channel Duplex data channel Transfer mode： Low power signal mode-LP High speed signal mode-the HS 　 * D-PHY Low power signal mode-LP 10Mbps Asynchronous transfer Single signal (0V~1.2V) High speed signal mode-the HS 　 80Mbps～1Gbps Synchronous transfer Differential signal (100mV~300mV) * Two Data Lane PHY Configuration Two Data Lanes HS Transmission Example Universal Lane Module Architecture * MIPI Data transmission Transfer mode ： High speed mode --800Mbps(Differential signal) Low power mode—10Mbps (Single signal) In the LP mode Lane0 only to return to the data The type of data packets： Short Packet：4 bytes (Fixed length) Long Packet：6~65541 bytes (Variable length