基于CAPP的X25.50箱体零件及专用夹具设计.docVIP

PAGE 基于CAPP的XZ25.50箱体工艺规程及专用夹具 设计 学生姓名 学院名称 专业名称 摘要 这次我毕业设计的课题就是基于CAPP的箱体加工工艺及专用夹具设计。先针对箱体零件的特点设计工艺规程，再设计专用夹具，最后对箱体零件进行分类编码。 CAPP是通过向计算机输入被加工零件的原始数据，加工条件和加工要求，由计算机自动地进行编码，编程直至最后输出经过优化的工艺规程卡片的过程。计算机辅助工艺规划常是联结计算机辅助设计(CAD)和计算机辅助制造(CAM)的桥梁。 在制造业信息化环境中，工艺设计是生产技术准备工作的第一步，工艺规程是进行工装设计制造和决定零件加工方法与加工路线的主要依据，它对组织生产、保证产品质量、提高劳动生产率、降低成本、缩短生产周期及改善劳动条件等都有直接的影响，是生产中的关键工作。工艺知识是制造企业中重要的知识资源之一，是使产品设计变为成品的整个制造过程中的基础资源，它对保证产品质量以及提高企业经济技术效益具有十分重要的作用。 夹具的快速设计与制造，己经成为产品快速变换和制造系统新建成或重构后运行的瓶颈，严重地影响制造系统的设计建造周期、系统生产率、质量和成本。专用夹具的使用，一方面缩短了工序时间，降低了加工成本；另一方面，夹具本身的设计制造工时、材料消耗等又增加了工件的成本。因此，在何种生产条件下使用哪种类型的夹具才是经济合理的，也就是夹具的经济性，一直都是夹具结构发展和设计的一个主要问题。 关键词:CAPP；工艺设计；专用夹具 Abstract This my Graduation Design is based on the CAPP XZ25.50 box of technological procedure and Special fixture design. First direcated against the peculiarity of the parts case design technological procedure,and design the special fixture, finally classification coding parts box. CAPP, through the importation of computer parts were processing the raw data, processing conditions and processing requirements, carried out automatically by computer coding, programming optimized output until the end of the process of order card process. Computer-aided process planning is often linked computer-aided design (CAD) and computer-aided manufacturing (CAM) as a bridge. The manufacturing industry becoming an information based society environment, the process planning produces is the first step in the technology preparatory work, the process planning is carries on the work clothes design to make and to decide the components processing method with processes the route the main basis, it produces, guarantee product quality, the enhancement labor productivity to the organization, reduces the cost, reduces the production cycle and the improvement work condition and so on all has the direct influence, is in the production key work. The craft knowledge is makes in the enterprise one of important knowledge resources, is causes the product design to become