lumpedelement.pptVIP

8.4.3 Interdigital Capacitor Analysis Capacitance C For infinite substrate thickness For a finite substrate where all the dimensions are in microns 8.4.3 Interdigital Capacitor Analysis Serial resistance where Rs is the sheet resistivity in ohms per square of the conductor used in the capacitors Quality factor L and Cs 8.5 Lumped Hybrids and Couplers 2.5.1 Lumped hybrids 900 hybrid 8.5.1 Lumped hybrids 900 hybrid For a 3dB lumped coupler 8.5.1 Lumped hybrids 1800 hybrid 8.5.1 Lumped hybrids 1800 hybrid For three 900 sections For one 2700 sections 8.5.2 Lumped Coupler 8.5.2 Lumped Coupler Parallel-line coupler Lumped elements 8.5.3 semi-lumped parallel coupled-line quadrature coupler Configuration Analysis of semi-lumped parallel coupler Even and odd equivalent circuits Analysis of semi-lumped parallel coupler The ABCD matrix for semi-lumped parallel coupled-line coupler The ABCD matrix for parallel coupled-line coupler Analysis of semi-lumped parallel coupler Then Analysis of Parallel-line coupler Analysis of Parallel-line coupler Analysis of Parallel-line coupler The A matrix of the even mode The A matrix of the odd mode Analysis of Parallel-line Coupler Analysis of Parallel-line Coupler Analysis of Parallel-line Coupler Analysis of Parallel-line Coupler For the coupler Then Analysis of Parallel-line Coupler Analysis of Parallel-line Coupler At centre frequency Then Analysis of Parallel-line Coupler Or And Analysis of Parallel-line Coupler 8. Lumped Elements for MMIC and RFIC 8.1 Why use lumped elements for RF and microwave circuits Advantage (compare with distributed elements) Small size Lower cost Wider bandwidth characteristics Large impedance transformation ratio capability Small interaction effects between circuit elements 8.2 Basic Lumped elements for MICs and RFIC Inductors Spiral inductors Wire inductors Capacitors Chip capacitors Monolithic capacitors Interdigital capacitors