Lecture7-5.pptVIP

7.5 Applications of Gear Trains Branching transmission （分路传动） To get a large train ratio Usually, the ratio of a pair of cylindrical gears with fixed axes should be less than 5. Usually, the ratio of a pair of cylindrical gears with fixed axes should be less than 5. Usually, the ratio of a pair of cylindrical gears with fixed axes should be less than 5. To change the speed of rotation To combine or resolve(分解) the motion The same differential gear train can also be used inversely to resolve(分解) the motion, as in a rear wheel(后轮) differential gear train of an automobile. If the automobile runs straight ahead， The differential gear train turns as a whole and the friction loss in it is avoid. Two wheels have extra relative rotations to the planet carrier H, while the planet carrier H rotates. In this way, the two wheels turns at different angular velocities. If the car turns, two wheels run at different angular velocities. * An epicyclic gear train can provide a very large train ratio. When T is off and C is on : ?1 = ?H and i1H = 1 When the brake(刹车片) T is on and the clutch(离合器) C is off : For the gear train shown in Fig.7-5, we get: ?1 and ?3 are combined to get ?H. Sun gears 1 and 3 drive the two rear wheels separately. They are both driven by bevel gear 4 as the planet carrier H. If the automobile runs straight ahead : If the car turns left with a radius r, the resistance of the road would make the wheel turn without slipping. That is