sht11在msp430中的程序.docVIP

这是暑假时用430的单片机写的温湿度传感器SHT10的程序，参考了官方的51例程，分享一下~~ /****************************************Copyright (c)********************************************************************************************LiPeng**********************************************************--------------File Info-------------------------------------------------------------------------------** File Name:?????? Sht10_Driver.c** Created by:????? LiPeng** Created date:?? 2008-09-15** Version:????????? 1.0** Descriptions:?? The original version****------------------------------------------------------------------------------------------------------** Modified by:** Modified date:** Version:** Descriptions:****------------------------------------------------------------------------------------------------------** System Function:?? Sht10 Driver------温湿度传感器SHT10驱动** 使用MSP430-F413连接方式: **????????????????????????????? VCC: P6.3**????????????????????????????? SCK: P6.4**????????????????????????????? SDA: P6.5**********************************************************************************************************/#include msp430x14x.h /*宏定义，延时函数，参数为1时相应延时分别为1us和1ms*/#define CPU_F?????????????? (double)1000000#define delay_us(x)???????? __delay_cycles((long)(CPU_F * (double)x/1000000.0))#define delay_ms(x)???????? __delay_cycles((long)(CPU_F * (double)x/1000.0)) /*常量定义*/#define uint unsigned int#define uchar unsigned char#define ulong unsigned long????????????????????????????? //adr command r/w#define STATUS_REG_W 0x06??? //000?? 0011??? 0#define STATUS_REG_R 0x07??? //000?? 0011??? 1#define MEASURE_TEMP 0x03??? //000?? 0001??? 1#define MEASURE_HUMI 0x05??? //000?? 0010??? 1#define RESET???????? 0x1e??? //000?? 1111??? 0 #define bitselect???? 0x01??? //选择温度与湿度的低位读#define noACK???????? 0#define ACK?????????? 1#define HUMIDITY????? 2#define TEMPERATURE?? 1 #define SCK?????????? BIT4#define SDA?????????? BIT5#define SVCC????????? BIT3 #define SCK_H???????? P6OUT|=SCK#de