AT89X51头文件.docVIP

/*-------------------------------------------------------------------------- AT89X51.H Header file for the low voltage Flash Atmel AT89C51 and AT89LV51. Copyright (c) 1988-2002 Keil Elektronik GmbH and Keil Software, Inc. All rights reserved. --------------------------------------------------------------------------*/ #ifndef __AT89X51_H__ #define __AT89X51_H__ /*------------------------------------------------ Byte Registers ------------------------------------------------*/ sfr P0 = 0x80; sfr SP = 0x81; sfr DPL = 0x82; sfr DPH = 0x83; sfr PCON = 0x87; sfr TCON = 0x88; sfr TMOD = 0x89; sfr TL0 = 0x8A; sfr TL1 = 0x8B; sfr TH0 = 0x8C; sfr TH1 = 0x8D; sfr P1 = 0x90; sfr SCON = 0x98; sfr SBUF = 0x99; sfr P2 = 0xA0; sfr IE = 0xA8;//中断允许寄存器 sfr P3 = 0xB0; sfr IP = 0xB8; //中断优先寄存器 sfr PSW = 0xD0; sfr ACC = 0xE0; sfr B = 0xF0; /* P0 Bit Registers ------------------------------------------------*/ sbit P0_0 = 0x80; sbit P0_1 = 0x81; sbit P0_2 = 0x82; sbit P0_3 = 0x83; sbit P0_4 = 0x84; sbit P0_5 = 0x85; sbit P0_6 = 0x86; sbit P0_7 = 0x87; /*------------------------------------------------ PCON Bit Values ------------------------------------------------*/ #define IDL_ 0x01 #define STOP_ 0x02 #define PD_ 0x02 /* Alternate definition */ #define GF0_ 0x04 #define GF1_ 0x08 #define SMOD_ 0x80 /*------------------------------------------------ TCON Bit Registers ------------------------------------------------*/ sbit IT0 = 0x88; sbit IE0 = 0x89; sbit IT1 = 0x8A; sbit IE1 = 0x8B; sbit TR0 = 0x8C; sbit TF0 = 0x8D; sbit TR1 = 0x8E; sbit TF1 = 0x8F; /*------------------------------------------------ TMOD Bit Values ------------------------------------------------*/ #define T0_M0_ 0x01 #define T0_M1_ 0x02 #define T0_CT_ 0x04 #define T0_GATE_ 0x08 #define T1_M0_ 0x10 #define T1_M1_ 0x20 #define T1_CT_ 0x40 #define T1_GATE_ 0x80 #define T