LonWorks_Configuration.pptVIP

* LonWorks Point Server Configuration EBI LonWorks Point Server Point Naming Considerations LPS generates point names based on the LNS Device Names LNS Supports long device names max 95 characters e.g. Level1-SW-FCU LPS truncates the name to the first non-blank 10 characters Level1-SW- . This is known as the base point name and it must be unique for the entire network. The PointID max 6 chars from the XML Device Template is then appended to the base point name to create the unique point name e.g. Level1-SW-App if the PointID is App Point Naming Considerations If after creating the base point name, the same base point name already exists in LPS e.g. Level1-SW-VAV - Level1-SW- the base point name is truncated again to 8 characters and a number starting at 01 is appended e.g. Level1-SW-VAV - Level1-S01 - Level1-S01App if the PointID is App This is not very useful, as the difference between Level1-SW-App FCU and Level1-S01App VAV is not apparent Suggest that device naming is considered carefully during specification of the LNS database Name overrides are not available Honeywell EBI Plug In The Honeywell EBI Plug-In has two main functions It associates an LNS Network and Network Interface with the EBI LonWorks Point Server Overrides customize XML Device Template default values Select the LonWorks Network you wish to use with EBI The Management Mode determines if the selections made here will affect the LPS connection Select a network interface to open the network with Click the Launch button when ready to go Starting Honeywell EBI Plug In The Honeywell EBI Plug-In can be started from the Start Menu Starting Honeywell EBI Plug In 2 The Honeywell EBI Plug-In can be started from LonMaker as a Network Plug-In The Honeywell EBI Plug-In will start using the current Network, Network Interface and Management Mode as used in LonMaker Honeywell EBI Plug In Once the Honeywell EBI Plug-In has started, unless you need to do any specific configuration you