国外戒指的尺寸对比.docVIP

Ring Sizer If you are unsure of your ring size follow the below instructions to make your ring sizer to give you an accurate measurement of you finger. You will need to check that you are viewing this document at 100% of its size. To do this select view from the toolbar and then zoom and make sure that this sent to 100%. You then need to print this document making sure that you don’t select the scale to fit page or shrink to fit page options from the print menu. To make sure that the ring sizer is accurate you will need to check the print size – the line below should measure 5cm. You will then need to cut out the ring sizer and make a slot as indicated. Place the end of the ring sizer through the slot to make a loop In order to take and accurate measurement you will need make sure that the ring sizer fits comfortably and you can move it over your knuckle Your ring size is shown by the letter on the line shown through the slot. Note: This ring sizer is provided as a guide only. For further information or advice on ring sizes contact our customer services department on 0845 120 2923 8.30am – 5pm Monday-Friday