电桥放大器的原理及应用-毕业设计论文.docVIP

电桥放大器的原理及应用 摘 要：在非电量测量仪器中经常采用电阻传感器,通过对电阻传感器中电阻的相对变化的测量来检测一些非电量。电阻传感器都是通过电桥的连接方式,将被测非电量转换成电压或电流信号，并用放大器做进一步放大。这种由电阻传感器电桥和运放组成的运放电路被称为电桥放大器。电桥放大器是非电量测试系统中常见的一种放大电路[1]。本文将主要介绍电桥放大器的原理、应用及应用中出现的问题和解决办法。 关键词：电桥放大器；非电量测量；非线性误差 The Principle and Application of the Bridge Amplifier Abstract:Resistive sensors are often used in non-power measuring instruments and the measurement of the resistors relative change in resistive sensor can be used to detect some of the non-electricity. Resistive sensors are based on the connection of the bridge and the measured non-electricity is converted into a volta