双鸭山市电控设备配件项目可行性研究报告.docVIP

双鸭山市电控设备配件项目 可行性研究报告 ◆?双鸭山市电控设备配件项目投资建设背景 ? ?◆?报告属性 【报告名称】可行性研究报告??? 【表现形式】文字分析、数据比较、统计图表??? 【交付时间】5-15个工作日??? 【交付方式】特快专递+电子邮件 ?◆?内容说明 ??黑龙江省投资项目咨询网专业提供建设项目可行性研究报告、项目建议书、项目申请报告、资金申请报告、节能评估报告、商业计划书、规划咨询报告等立项批地、商业文件编制服务。 ◆?编写大纲及范文目录 ??由于可行性研究报告属于订制报告，以下报告目录仅供参考，成稿目录可能根据客户需求和行业分类有所变化。 ★可行性研究报告服务流程： 【1】您确定报告定制意向（请告知项目信息） 【2】项目资料采集与前期辅导（确定基本方案） 【3】双方签订报告定制合同（传真/快递/上门） 【4】您支付定制服务款项（请汇至公司账户） 【5】组织研究员启动服务（安排相应资历专家） 【6】反馈意见与报告修改（反馈修改意见） 【7】定稿确认与打印装订（定稿报告采用胶装） 【8】给您快递产品及发票（EMS/顺风快递） 黑龙江省投资项目咨询网 spacing of 100mm. C, line line line nearby. D, spare wire unified terminal strip Terminal (terminal strip at the top of the vertical, horizontal terminal strip from the harness to Terminal Pai end at the beginning), length to ensure as far as Terminal and set aside. After e, form a wire harness, cable, line. When the line should be in the core wire for better identification and marking on the cards will be prepared in advance, alternate core core content for the cable numbering. F, finish line, according to the corresponding terminal locations, wire one by one from the bunch out, pulling line, should be kept parallel to each other and more. Core dark as possible, determined in accordance with specific conditions, it is required that: neat, beautiful, shapely, pleasing to the eye. 7.6.2 wiring technology, out of the core wire according to Terminal position, cut off the excess, with wire stripping pliers or electrician knife stripped of insulation, so that connection. Stripping should not damage the copper core. B, core wire on the oxide and chip-insulated electricians knife scrape. C, core processing has been completed, thread round long nose pliers in a clockwise direction. Circle with the screw in the direction of spin in the same direction, circle should be appropriate, it is best to slightly larger than the screws, bent round the circle and the length of root and appropriate so set screw is screwed on tight. D, when on the crimp-type terminals when wiring, thre