毕业设计论文纸.docVIP

高等教育毕业设计（论文） 题 目 专 业 班 级 学 生 指导教师 年 西 安 理 工 大 学 毕 业 设 计（论 文）任 务 书 专业 班 学生 一、毕业设计（论文）课题 二、毕业设计（论文）工作自 年 月 日起至 年 月 日止 三、毕业设计（论文）进行地点 四、毕业设计（论文）的内容要求： 负责指导教师 指 导 教 师 接受设计（论文）任务开始执行日期 学生签名 评阅人评语和评分意见 学生姓名 评阅人 年 月 日 指导教师评语和评分意见 学生姓名 指导老师 年 月 日 毕业设计（论文）答辩考核 对 班 学生 所完成的课题为 的毕业设计（论文），根据指导教师、评卷人的意见，经答辩考核，提出如下评语： 并综合评定该生毕业设计（论文）成绩为 答辩委员会（答辩组）： 主席（组长） 委员（组员） 年 月 日 spacing of 100mm. C, line line line nearby. D, spare wire unified terminal strip Terminal terminal strip at the top of the vertical, horizontal terminal strip from the harness to Terminal Pai end at the beginning , length to ensure as far as Terminal and set aside. After e, form a wire harness, cable, line. When the line should be in the core wire for better identification and marking on the cards will be prepared in advance, alternate core core content for the cable numbering. F, finish line, according to the corresponding terminal locations, wire one by one from the bunch out, pulling line, should be kept parallel to each other and more. Core dark as possible, determined in accordance with specific conditions, it is required that: neat, beautiful, shapely, pleasing to the eye. 7.6.2 wiring technology, out of the core wire according to Terminal position, cut off the excess, with wire stripping pliers or electrician knife stripped of insulation, so that connection. Stripping should not damage the copper core. B, core wire on the oxide and chip-insulated electricians knife scrape. C, core processing has been completed, thread round long nose pliers in a clockwise direction. Circle with the screw in the direction of spin in the same direction, circle should be appropriate, it is best to slightly larger than the screws, bent round the circle and the length of root and appropriate so set screw is screwed on tight. D, when on the crimp-type terminals when wiring, threads do not have to bend. Insulating part should be careful not to press it into a Terminal, and make the loop doesnt