设置PPT播放时说明文字.docVIP

第一步，在你的laptop的显示属性中进行设置。如图所示，在连接了外部显示器或者投影仪的情况下，点击“2”号屏幕，并按照图中高亮标注处选中“将windows桌面扩展到该显示器”同时设置适当的分 辨率。单击“应用”，就可以看到如下的效果。 由于家里没有投影做演示，就用了一台上了年纪的CRT做示意。从两个屏幕可以看见不同的显示内容，左面的CRT的屏幕正是要给演讲受众看的。这样，下面的 观众就不会看见演讲者的笔记本里面装了什么东西，演讲者可以根据自己的意愿把需要给观众看的放映出来， 而不是把演讲者的所有操作都放映出来。（这个好处我就不多说了，有过类似经历的朋友想必深有体会）第二步，打开你需要演讲的PPT进行放映前的准备工作。选择放映的设置在图中高亮的部分选中“显示演讲者视图”（这个是重点）单击确定后就完成了设置。第三步，开始放映。点击图中的位置，或者直接按“F5”或Shift +F5。两者的区别是，F5从头开始放映，而图示按钮(Shift +F5)是从当前slide开始往后放映。最后，观看效果这个就是演讲者看到的画面，下面高亮的部分就是“备注”的内容。.分析这个视图，演讲者不仅可以看见每个slide的预览；.还可以知晓下一张PPT的大致内容（标题）；.可以不用准备，直接阅读“备注”（对于新手和临场不知所错的朋友比较适合）；.可以很好的控制演讲时间；.在进行slide选择（非正常流程）的时候，可以点击“黑屏”，这样观众就看不到你在进行何种“胡乱操作”了。 spacing of 100mm. C, line line line nearby. D, spare wire unified terminal strip Terminal (terminal strip at the top of the vertical, horizontal terminal strip from the harness to Terminal Pai end at the beginning), length to ensure as far as Terminal and set aside. After e, form a wire harness, cable, line. When the line should be in the core wire for better identification and marking on the cards will be prepared in advance, alternate core core content for the cable numbering. F, finish line, according to the corresponding terminal locations, wire one by one from the bunch out, pulling line, should be kept parallel to each other and more. Core dark as possible, determined in accordance with specific conditions, it is required that: neat, beautiful, shapely, pleasing to the eye. 7.6.2 wiring technology, out of the core wire according to Terminal position, cut off the excess, with wire stripping pliers or electrician knife stripped of insulation, so that connection. Stripping should not damage the copper core. B, core wire on the oxide and chip-insulated electricians knife scrape. C, core processing has been completed, thread round long nose pliers in a clockwise direction. Circle with the screw in the direction of spin in the same direction, circle should be appropriate, it is best to slightly larger than