fsl_sata_controller_driver.docx

Author:YY_Hong Department:EmSwDept Date：2011-3-10 Abstract 本文给出了freescale公司的sata控制器的linux驱动实现方式。Analyse the difference between bare board and the board installed linux.Try to address the performance bottbleneck. Text Freescale’s sata controller driver is in the lowest layer of the block driver.below is the figure show up the relation about all layers in block driver: 驱动是top-down transmit。 对/dev/sdx初始化安装 ATA_BASE_SHT #define ATA_BASE_SHT(drv_name) \ .module = THIS_MODULE, \ .name = drv_name, \ .ioctl = ata_scsi_ioctl, \ .queuecommand = ata_scsi_queuecmd, \ .can_queue = ATA_DEF_QUEUE, \ .this_id = ATA_SHT_THIS_ID, \ .cmd_per_lun = ATA_SHT_CMD_PER_LUN, \ .emulated = ATA_SHT_EMULATED, \ .use_clustering = ATA_SHT_USE_CLUSTERING, \ .proc_name = drv_name, \ .slave_configure = ata_scsi_slave_config, \ .slave_destroy = ata_scsi_slave_destroy, \ .bios_param = ata_std_bios_param, \ .unlock_native_capacity = ata_scsi_unlock_native_capacity, \ .sdev_attrs = ata_common_sdev_attrs #define ATA_NCQ_SHT(drv_name) \ ATA_BASE_SHT(drv_name), \ .change_queue_depth = ata_scsi_change_queue_depth ATA_PIO_SHT /* PIO only, sg_tablesize and dma_boundary limits can be removed */ #define ATA_PIO_SHT(drv_name) \ ATA_BASE_SHT(drv_name), \ .sg_tablesize = LIBATA_MAX_PRD, \ .dma_boundary = ATA_DMA_BOUNDARY ATA_NCQ_SHT #define ATA_NCQ_SHT(drv_name) \ ATA_BASE_SHT(drv_name), \ .change_queue_depth = ata_scsi_change_queue_depth struct ata_host struct ata_host { spinlock_t lock; struct device *dev; void __iomem * const *iomap; unsigned int n_ports; void *private_data; struct ata_port_operations *ops; unsigned long flags; #ifdef CONFIG_ATA_ACPI acpi_handle acpi_handle; #endif struct ata_port *simplex_claimed; /* channel owning the DMA */ struct ata_port *ports[0]; }; struct ata_port struct ata