JUNOS-password.docVIP

Current Note Number:17787 Synopsis: How to recover root password for JUNOS versions 4.X or above Problem: How to recover root password Solution: Get console access Power up the system Enter pathname The system will boot up Configuration Mode For routers running JUNOS 4.X. Obtain console access Power of the system and boot it up in single user mode. This is done by typing -s at the boot: prompt. BOOT @ 0x10000: 639/64512 k of memory, serial/dual console Boot default: 0:wd 0,a kernel Usage: bios_drive:interface unit,partition kernel_name options interface fd, wd or sd unit 0, 1, ... partition a, c, ... kernel_name name of kernel, or ? for list of files in root directory options -c userconfig -s single user -v verbose -D dual consoles -h alternate console -P probe kbd 按空格后输入 boot: -s Type -s Next, the system will do its normal bootup process. When prompted for pathname enter: /usr/libexec/ui/recovery-mode This will run a script for PW recovery. Enter pathname of shell or RETURN for sh: /usr/libexec/ui/recovery-mode The system will finish booting up and put you at a root prompt as such. ... ... NOTE: the system Starting CLI ... root Now you can go into configuration mode and edit or delete the root authentication password. root configure Entering configuration mode [edit] root# delete system root-authentication [edit] root# commit and-quit commit complete Exiting configuration mode Finally, reboot system. root@congo3 request system reboot Reboot the system ? [yes,no] no yes For routers running JUNOS 5.X and above From console, interrupt the boot routine: Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel] in 9 seconds... Enter into single-user mode: Type ? for a list of commands, help for more detailed help. ok boot –s Enter the shell: System watchdog timer disabled Jan 1 00:36:47 init: /etc/spwd.db: No such file or directory Enter full pathname of shell or RETURN for /bin/sh: Mount the virtual f