（HSE管理文件）FREP-04-HSE-2012.doc

福建项目ROJECT CONSTRUCTION 电动工具程序 POWER TOOLS PROCEDURE 文件编号DOCUMENT NUMBER: -04-HSE-2012  电动工具程序 POWER TOOLS PROCEDURE 目 录 TABLE OF CONTENTS 编号No. 页码Page 1.0 目的PURPOSE 3 2.0 范围SCOPE 3 3.0 定义DEFINITIONS 3 4.0 职责RESPONSIBILITIES 3 5.0 指导INSTRUCTIONS 3 6.0 参考资料REFERENCES 8 7.0 附件ATTACHMENTS 8  1.0 目的Purpose 1.1 本程序提供电动工具安全使用的最低要求。 This Procedure provides the minimum requirements for the safe use of power tools. 2.0 范围Scope 2.1 本程序适用于项目电动工具的安全使用。 This Procedure is applicable for the safe use of power tools in FREP project. 3.0 定义Definitions 3.1无None 4.0 职责Responsibilities 4.1 受控承包商的惯用做法至少要满足或超过第5节和附件所规定的要求，受控承包商应根据要求对工作进行管理和监督。 MANAGED CONTRACTOR’s practices as a minimum shall meet or exceed the requirements specified in Section 5 and Attachments, and MANAGED CONTRACTOR shall manage and supervise the work in accordance with the requirements. 4.2 业主或业主代表人员将根据第5节和附件所规定的要求对受控承包商的符合 性进行监督、检查和审核，业主或业主代表有权要求受控承包商按照缺陷通知书进行整改。 MANAGED CONTRACTOR’s conformance with the requirements specified in Section 5 and Attachments shall be subject to monitor, inspection and audit by Owner or Owner’s representative, and Owner or owner’s representative shall have the right to require MANAGED CONTRACTOR to correct any deficiencies upon notification. 5.0 指导Instructions 5.1 概述General 5.1.1 员工应当遵循制造厂商关于电动工具的安全存放、操作以及维修方面的所有说明。 Employees shall follow all Manufacturers’ instructions regarding the safe storage, operation, and maintenance of power tools. 5.1.2 如果员工没有经过恰当，安全地使用电动工具方面的培训，则不得使用此类工具。 Employees shall not use a power tool unless they have been trained to use it properly and safely. 5.1.3 在操作此类工具前所有防护装置都将就位 All guards shall be in place before operating the tool. 5.1.4 当使用动力工具或在动力工具旁作业时要佩带适当的眼罩保护。 Appropriate eye protection shall be worn when operating or working near power tools. 5.1.5使用电动工具时员工不能穿宽松服装和佩带珠宝手饰。 Employe