信号源(正弦波,三角波,锯齿波,方波,步进10HZ,01V).docVIP

信号源（正弦波，三角波，锯齿波，方波，步进10HZ,0.1V）?? 2009-08-27 19:14:00|??分类：?默认分类|字号?订阅 #include reg52.h?#define uchar unsigned char?#define uint unsigned int?#define DAC1 P0#define DAC2 P2sbit rs=P3^0;?sbit rw=P3^1;?sbit en=P3^2;?sbit k1=P3^3;sbit k2=P3^4;sbit k3=P3^5;sbit k4=P3^6;uchar mm,gao,di,temp,k1num,k2num,num,Anum,Fnum;?uchar bai,shi,ge,Fbai,Fshi,Fge,date2,Ashi,Age;uchar code tbsin[]={128,144,160,175,190,203,216,227,236,244,250,254,255,255,254,250,244,236,227,216,203,190,175,160,144,128,112,96,81,66,53,40,29,20,12,6,2,0,0,2,6,12,20,29,40,53,66,81,96,112};?uchar code tbsanjiao[]={0,10.625,21.25,31.875,42.5,53.125,63.75,74.375,85,95.625,106.25,116.875,127.5,138.125,148.75,159.375,170,180.625,191.25,201.875,212.5,223.125,233.75,244.375,255,255,244.375,233.75,223.125,212.5,201.875,191.25,180.625,170,159.375,148.75,138.125,127.5,116.875,106.25,95.625,85,74.375,63.75,53.125,42.5,31.875,21.25,10.625,0,};uchar code tbjuchi[]={0,5,10,16,21,26,31,36,42,47,52,57,62,68,73,78,83,88,94,99,104,109,115,120,125,130,135,141,146,151,156,161,167,172,177,182,187,193,198,203,208,213,219,224,229,234,239,245,250,255,};uchar code tbfangbo[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255};uchar code tbDAC2[]={1,5,10,16,21,26,31,36,42,47,52,57,62,68,73,78,83,88,94,99,104,109,115,120,125,130,135,141,146,151,156,161,167,172,177,182,187,193,198,203,208,213,219,224,229,234,239,245,250,255,};uchar code tbF[]={56,74,89,102,113,123,131,138,145,151,156,161,165,169,173,176,179,182,185,187,189,191,194,195,197,199,200,202,203,205,206,207,208,209,211,212,213,213,214,215,216}; void delay(uint z)//延时?{?? uint x,y;?? for(x=z;x0;x--)????? for(y=110;y0;y--);}void write_com(uchar com)//LCD写命令{?rs=0;??? rw=0;??? en=0;??? P1=com;??? delay(2);??? en=1;??? delay(2);??? en=0;???}void write_date( uchar date)//LCD写数据{?rs=1;??? rw=0;??? en=0;??? P1=date;??? delay(