LNG储罐首船预冷汇编.ppt

Timeline of Operation DR-0101 Unloading Arms DR-0102 Vapor Return Arm Dr-0103 Unloading System Dr-0104 Unloading System Dr-0202 T-0202 Dr-0601 Flare System Model View of Jetty Platform * * Fujian LNG Cooldown Presentation福建液化天然气冷却演示 Option 4. 方案4 Cooldown Unloading System T-0202 冷却卸载系统T-0202 Cooldown Steps冷却步骤 1. Displace Nitrogen from T-0202 Unloading System Piping before cooldown 冷却前将氮气抽离出T-0202和卸载系统管道 2. Cooldown Unloading and T-0202 only 仅冷却卸载系统和T-0202 3. Displace LNG from unloading into T-0202 将液化天然气从卸载系统运至T-0202 4. Re-cooldown the facility with a second ship 用另一艘船只再次冷却设备 Cooldown Description冷却说明 Displace the Nitrogen from T-0202 with vapor from the ship vaporizer 用船只汽化器中的蒸汽置换T-0202中的氮气 Cooldown the Unloading and LP sendout systems with cold vapor from ship 用船上的冷蒸汽冷却卸载和LP输出系统 Cooldown T-0202 until design temperature 将T-0202冷却至设计温度 Unload all cargo into T-0202 将船上所有气体卸载到T-0202 Ship departs 船只驶离 Recover unloading system LNG to T-0202 将卸载系统中的液化天然气运回T-0202 Preparation准备阶段 A valve lineup will be done for each step 安排每一步的阀门开关顺序 Monitoring of all cooldown instruments will be on the DCS trends 由集散控制系统监视所有的冷却设备 Monitoring of the unloading lines movement will be by a team of engineers 将由一队工程师监视卸载管线作业 Communication with the ship will be from the CBI focal point in the CCR 与船只的联系将由CBI中央控制室精英人员执行 Step 1: Nitrogen Displacement步骤1：氮气置换 Valve line up to direct the ship vapor to T-0202 bottom fill line. 执行阀门开关顺序，引导船上蒸汽进入T-0202底部的充液管线 Direct the Nitrogen through the BOG system to the Flare Stack 引导氮气通过BOG系统进入火炬塔 Control the Tank pressure on 06-PV-0004 控制06-PV-0004上的储罐压力 Nitrogen target is 30% 所需氮气量为30％ Estimated time for 12 hrs 估计所需时间为12个小时 Step 2: Unloading System Cooldown步骤2：卸载系统冷却 Vapor Cooldown of the unloading system 卸载系统的蒸汽冷却 Cooldown will be controlled by the ship on instructions from the DCS operator 冷却作业由船只根据集散控制系统操作员的指令进行控制 Cooldown rate will be 10 to 20 deg / hr 冷却速率为10-20℃/小时 Cooldown can start during the Nitrogen displacement