PC Camea(网络摄像机)驱动安装及使用指南.docVIP

PC Camera(网络摄像机) 驱动安装及使用指南 说明 此文档介绍了PC Camera驱动在Windows＠ 2000系列平台和windows＠ XP系列平台上 的安装方法。 此文档针对的范围是所有需要使用PC Camera的用户。 PC Camera驱动由以下几个文件组成，分别是?MtkJpeg.dll、usbmtk.inf、usbmtk.sys。 PC Camera当前驱动只支持Windows＠ 2000系列平台和windows＠ XP系列平台，不支持其他平台。 驱动安装指南 windows＠ 2000平台 用数据线连接手机和计算机，并在手机上选择“网络摄像机”菜单； 计算机上会弹出如下对话框，单击“下一步(N)”按钮； 3．在弹出的对话中单击“下一步(N)”按钮； 4．在弹出的对话中选中“指定一个位置(S)”，单击“下一步(N)”按钮； 5．在如下的弹出对话框中选择“浏览(B)…”按钮，选择驱动所在的目录下的“usbmtk.inf”文件，然后分别点击“确定”和“完成”按钮，完成驱动的安装； 6．安装完成 windows＠ xp平台 WINDOWS@XP下自动识别。 网络摄像机使用 将手机连接到计算机后，手机上没有出现“网络摄像机”的菜单项 选择“网络摄像头”菜单 如果您需要更新驱动，请在“设备管理器”中寻找如下名称的设备： the oil level to the normal oil level. (2) for the secondary prevention of the leakage of cooling water pipe fittings, valve parts before installation to check ... 4.2 measures to eliminate quality defects of cables cable laying in front of the cable construction, design, supervision and construction units to deliver the design, and drawing the third. Combined the engineering field to find fault, adding omitted items. Because the unit used computer DCS control and adds a great deal of control and signal cables. So you should carefully review, checks for missing physical cable, ready for construction and to verify cable length, specifications, familiar with the cable channel and the device location and bracket cable bracket on the section number. At the time of preparation of the inventory of cable, first of all, the professional carefully study electrical schematics, in accordance with the principle of accounting the cable path cable volume, the number of cores used, total volume and design inventory check cable to cable with and without omission, laying of the cable in order to ensure the process does not put a cable one cable. Finally, at the time of inventory, prepared to take the same path the cables together. Inventory preparation is completed, later in each enclosure affixed on both sides of each side of the cable you want to lay accurately verify cable lengths a