电子商务实战训项目策划书模板.docVIP

电子商务实战训练项目策划书 项 目 交给我网店托管项目商业策划书 团 队 负责人 成 员 2012-9 目录 交给我网店托管项目商业策划书 执笔：赵本山 摘要： （要求详略得当，突出重点亮点；条例清晰严谨；直观清晰，图表、图例使用生动；） 背景：如今项目： button. Select [login rule] button above the [rule number] menu under ... Then open the barcode generator for the barcode002 part of the Properties dialog box, click the [factor/control] button in the destination edit box,Open the barcode generator for the barcode003 part of the Properties window, click the [factor/control] button, and then at the destination use the Ctrl + v, to enter into the well on the 2nd floor you just copied right 2nd truck name (example PART_STORE_00099), then click on [OK] button. Open 2 right up 3rd truck Properties window, use the Ctrl + c will [summary] property names are copied. Open the barcode generator for the barcode004 part of the pop-up menu in the property dialog box, click the [factor/control] button in the destination using the Ctrl + v, to enter copy 2 3rd truck name right (case of PART_STORE_00100), then click the [OK] button. Then use Lesson3-2.emu as the file name to save the other. Click on menu bar | simulation | start | or time column in the [start] button, you see the goods are put on the conveyor belt, and robotic loading pallets for through the pulley tracks were moved to the automatic tridimensional warehouse storage. If Tray 1 out of the library, select the tray popup menu [IOSection Library instructionmenu (1 layer). If the tray 2 out of the library, right-click with the mouse on the tray in the pop-up menu, select [IOSection Library instructionenu (2). From 2 out of the tray after it has been transferred to the transit point discharge, workers unloaded the goods. Empty tray again by rail back to automatic stereoscopic warehouse. Remove the cargo by conveyor belts was transferred to corresponding cage inside the vehicle. Note 1: simulation before the start, please set the environment for the 1th floor sections to be seen. Click th