毕业设计（论文）-66kV变电站设计.docVIP

摘要 电力系统是国民经济的重要能源部门，而变电所的设计是电力工业建设中必不可少的一个项目。由于变电所的设计内容多、范围广、逻辑性强，因此要求要有较高的专业水平，并熟悉各种设计规程和设计原理，设计过程中要针对变电所的规模和形式，具体问题具体分析。本文是对大北60kv/10kv二次降压变电所提供的设计方案，设计分为两部分。 第一部分说明书中包括了对原始设计条件的分析，导线的选择，无功补偿静电电容器的选择，主变压器的选择，电气主接线的确定，短路计算，各种电气设备的选择与校验，高压配电装置的规划设计，防雷保护的规划设计。在设计和选择设备中都充分考虑到了可靠性，灵活性和经济性。另外，各种断路器、隔离开关、电流互感器型号的选择要与高压配电装置的布置联系在一起考虑。 计算书部分包括了计算变电所的最大负荷容量，无功补偿的计算，计算主变压器的容量，化简短路阻抗和计算短路电流，电气设备的校验，和防雷保护保护范围的计算。 本设计是有文字说明和图表解释的比较完整的二次降压变电所的设计方案。 关键词 电力系统继电保护Abstract The electrical power system is the national economy important energy department, but the transformer substation design is in the electric power industry construction an essential project. Because transformer substation design content many, scope broad, logical, therefore requests to have to have the high specialized level, and the familiar each design regulations and the principle of design, in the design process must aim at the transformer substation the scale and the form, concrete question concrete analysis. The content quite are many, the scope is broad, different voltage rank, different type, when heterogeneity load transformer substation design stresses the aspect is dissimilar. This book is about mishan 60/10KV Transformer Station Design of Electric Portion. The design is divided into two parts. The first part description includeddesigned conditional analysis to the originality,the choice of transmission line,static capacitor and main transformer,key diagram finalized,ect. high pressure in transformer substain, In all of the design the equipments choice in consideration of reliability, flexibility and economy. Moreover, all of the circuit breaker, disconnecting switch, electric current the choice of feeling machine model number want to go together with the decoration of giving or getting an electric shock the device with high pressure to contact to together consider with each other. Calculations include the calculation of the maximum load capacity of substations, reactive power compensation, the calculati