污水处理,就到国污水处理工程网!.docVIP

污水处理工艺流程图 污水处理工艺流程是用于某种污水处理的工艺方法的组合。通常根据污水的水质和水量，回收的经济价值，排放标准及其他社会、经济条件，经过分析和比较，必要时，还需要进行试验研究，决定所采用的处理流程。一般原则是：改革工艺，减少污染，回收利用，综合防治，技术先进，经济合理等。在流程选择时应注重整体最优，而不只是追求某一环节的最优。 下面，我们就将各种污水处理工艺流程列举出来： 污水处理典型工艺流程 ? 氧化沟工艺： ? 中水回用处理典型工艺流程： ? 垃圾渗滤液典型工艺流程： ? 城市污水回用处理工艺： ? 钢铁乳化液处理典型工艺流程： ? 污水处理，就到中国污水处理工程网！ of vision. 3, build, fitting in with the urban master plan in Yibin city rapid rail transit long term network, as well as the vision of Yibin city, and future development of rail transit network. 4, Yibin city, preliminary rail traffic levels service levels, system model, and technical standards. 5, to ensure that network can be implemented. 6, stable conditions for planning and supporting of Yibin city track traffic construction and formation of rail transit industry, provide conditions for the start-up and development of rail transit in Yibin city. 1.7 technical course technology is the projects research program and research ideas. Technology reflects the various stages in the process, logical relations between various levels, research, techniques and phases. Network planning process the whole process can be divided into four parts, namely, background research, network architecture research, planning and implementation of research and programming interfaces. Figure 1.7-1 Yibin city rail transit network planning technology roadmap planning interface is mainly responsible for network planning interface with follow-up planning tasks. Network planning Urban planning system in a transitional position, online network planning is completed, will be carried out as soon as possible the following planning projects: 1, detailed control of the land of rapid rail transit network planning; 2, the partitioning for network planning; 3, joint planning of rail transport and urban transport in other ways; Detailed technical courses see below. Figure 1.7-2 General technology route figure 2nd chapter City sta