wps演示中编母版的方法.docVIP

wps演示中编辑母版的方法 母版在WPS演示中是很重的一个功能，如果内容比较多再一张一张的为幻灯片添加背景等设置那就费时费工了，而模板恰好能解决这个问题下面来看一下母版的使用方法。 　　1、打开一个演示文稿。 　　2、选择“视图”—“幻灯片母版”，打开幻灯片的母版。 　　3、对幻灯片母版进行编辑。以添加背景为例，通过“插入”—“图片”为母版添加背景图片。 　　4、编辑完成后，通过“幻灯片母版”—“关闭母版视图”关闭母版。 　　5、这时，你会发现你所打开的幻灯片会同母版保持一样的风格设置。以上文添加背景图片为例，4张幻灯片的背景图片与母版的相同。 　　6、当然，我们也经常会遇到幻灯片首页和内容页背景不同的情况。在这种情况下，继续回到母版的编辑状态中，选择添加“新标题母版”。 　　7、对新标题母版进行设置。还是以背景为例，为新标题母版替换一张与之前不同的背景图片，然后“关闭母版视图”。 　　8、你会发现，首页与内容页明显的区分开来了。 be limited to no more than 2 days of work, material deposited in special insulated containers, material handling to gently and make use of thermal insulation material in windproof, waterproof, moisture-proof measure. 6.2 thermal design optimization for high-temperature special thermal insulation for piping support and hanger design, reduced heat dissipation of the hangers, ensure that the wall does not overheat. Small-diameter piping, thermal instrument layout and positioning of support and hanger design take fully into account the expansion space and insulation thickness. Large-diameter pipes after heat preservation plastering construction of valves, turbine, checking smooth surface, high temperature powder paint fully dry after. Protective coverings for electric equipment insulation boards designed with pressure plate, when ordering according to the installation diagram, model specifications publishing order, ensure when installing corners neat, uniform appearance, reduce the amount of on-site machining. Before valves, flange insulation shell construction, be sure to make a unified model, all valves, flanges, insulation cover unified, tidy and beautiful. When four parts such as pipes, boiler insulation, must do first article inspection, proof of design and construction methods, technology can meet the technological requirements, before extensive construction. Boiler steel beams, door opening boxes designed with insulation gaskets, flange cannot be oblique, even fastened. Back into the slope of the tubing during installation pa