如何为您的AD选择最合适的基准电压源和放大器.docVIP

如何为您的ADC选择最合适的基准电压源和放大器? 在线问答: [问：callhxw] 如何评定一颗ADC非线性？丢码？ [答：Jing] you can use ADCs INL and DNL parameter to evaluate the non-linearity and you can also use ENOB parameter to check code loss. Thanks!Generally ENOB releated with ADCs SNR [2006-2-28 10:32:08] [问：吉星] 在差分输入时，不考虑直流，使用差分放大器和变压器哪个更好． [答：Mariah] Transformer is better for the better noise and distortion performance, especially in very high frequencies. [2006-2-28 10:32:14] [问：Jane Yang] 请问应如何处理板级噪声对于高精度AD的影响？特别是输入部分的噪声？ [答：Jing] This is a good question and its very difficult to answer. Generally, You should consi