爱普生针式打印驱动安装与卸载.docVIP

安装光盘中的驱动： 580K系列、300K+系列、680K系列、670K+T/660K、1600K3+/K4+/1900KII+，3500K/3250K 590K/1600KIIIH/136KW、690K系列 630K/730K系列、790K、1900KIIH、50K/55K WinXP系统安装系统自带的驱动： 开始— 设置— 打印机和传真— 添加打印机 添加打印机向导— 下一步 选“连接到计算机的本地打印机”，取消“自动检测并安装即插即用打印机” 选择端口 选择厂商和打印机型号，通用驱动是LQ-1600K或LQ-2500 若不是第一次安装此驱动会出现此界面，选替换即可。 Win7系统安装系统自带的驱动： 开始— 设备和打印机 添加打印机 通用驱动是LQ Series 1 80 和LQ Series 1 136 安装下载的驱动： 下载的驱动和状态监视器程序大多数是自解压缩文件 选择型号 软件协议 Print spooler被禁用或停用导致无法安装驱动或无法打印 控制面板—管理工具—服务 右击我的电脑—管理—服务和应用程序—服务 卸载驱动： be limited to no more than 2 days of work, material deposited in special insulated containers, material handling to gently and make use of thermal insulation material in windproof, waterproof, moisture-proof measure. 6.2 thermal design optimization for high-temperature special thermal insulation for piping support and hanger design, reduced heat dissipation of the hangers, ensure that the wall does not overheat. Small-diameter piping, thermal instrument layout and positioning of support and hanger design take fully into account the expansion space and insulation thickness. Large-diameter pipes after heat preservation plastering construction of valves, turbine, checking smooth surface, high temperature powder paint fully dry after. Protective coverings for electric equipment insulation boards designed with pressure plate, when ordering according to the installation diagram, model specifications publishing order, ensure when installing corners neat, uniform appearance, reduce the amount of on-site machining. Before valves, flange insulation shell construction, be sure to make a unified model, all valves, flanges, insulation cover unified, tidy and beautiful. When four parts such as pipes, boiler insulation, must do first article inspection, proof of design and construction methods, technology can meet the technological requirements, before extensive construction. Boiler steel beams, door opening boxes designed with insulation gaskets, flange cannot be oblique, even fastened. Back into the slope of t