关于XX同志的党综合考察材料.docVIP

关于 同志的 入党综合考察材料 党支部 年 月 日 说 明 除说明被考察人基本情况、入党培养过程外，本材料还应包含以下各方面的考察意见： 培养联系人意见确定为发展对象的党小组意见为发展对象的支委会（支部会）意见为发展对象的意见基 本 情 况 姓 名 出生年月 性 别 现有文化程度 籍 贯 岗位/职务 工 作 简 历 毕业后入职到现今具体任职情况 入 党 培 养 过 程 递交入党申请书时间、党校培训情况与成绩 支部确定入党积极分子时间 是否每半年上交1份思想汇报 确定培养人情况 现 实 表 现 1、政治思想情况 2、工作中，履行岗位职责的具体表现，获得奖项、证书、资格、职称情况 3、近三年年终考核与公司专业考试成绩情况 4、生活中，与同事团结合作情况 5、存在不足 培 养 联 系 人 意 见党 小 组 意 见支 部 会 意 见意 见 the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler of the gap should not exceed four at a time, when the gap is too large, you can use the gasket with the feeler gauge measurement of gauge blocks or finishing. bearing surface, markup should be in accordance with the mounting support pads, and retest the thickness. Once the lif