加拿大能源集团站建设方案书.docVIP

加拿大汉维能源服务(集团)公司 网站策划方案 一、加拿大汉维能源服务（集团）公司加拿大汉维能源服务（集团）公司加拿大汉维能源服务（集团）公司加拿大汉维能源服务（集团）公司 是为了企业还是为了客户？ 是让企业自己满意，还是让浏览者满意？ 是设计为先，还是内容为先？ 上述问题的答案是显而易见的，但遗憾的是很多企业在进行网站建设时，往往忽略了这些最基本的问题，而这些问题所指向的答案只有一个---以实现良好的网站用户体验为开发原则，满足广大用户的需求。而这一建站原则的贯彻必将带来企业真正期望的、通过网站实现营销宣传的运营目标。 针对这次网站改版的几点建议： 加拿大汉维能源服务（集团）公司M3型虚拟主机臻于完美的普及型虚机产品 WIN 2003/UNIX FreeBSD 6.4 ·独立网页空间300M·数据库空间50M·独立日志空间150M·流量限制30G/月·数据库SQL 2000，ACCESS(WIN 2003)·数据库MySQL5，SQL Lite(UNIX)·支持.net1.0/2.0/3.5 (Win2003) 加拿大汉维能源服务（集团）公司 the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler of the gap should not exceed four at a time, when the gap is too large, you can use the gasket with the feeler gauge measurement of gauge blocks or finis