2013年河南普通高中毕业班高考适应性测试(一)文科综合能力地理测试.docVIP

2013年河南省普通高中毕业班高考适应性测试（一） 文科综合能力测试试题地理参考答案 第Ⅰ卷 题号 答案 题号 答案 题号 答案 题号 答案 题号 答案 题号 答案 1 C 2 B 3 D 4 A 5 B 6 B 7 C 8 D 9 C 10 C 11 B 第II卷 36．（26分）尼加拉瓜湖水位随着季、季的交替而变化，季水位；季水位。在该国的北部和中部地区太平洋海湾，火山与海洋隔离，形成湖泊。海湾中的鱼类逐渐适应水体的淡化，因而尼加拉瓜湖成为唯一有海洋鱼类的淡水湖。．（2分）．（分）．（分）泥石流、崩塌、滑坡、地面塌陷．（分）问题措施跨流域调水；流域内合理调配水资源发展节水农业；。 河南省普通高中毕业班高考适应性测试一 coupling Centre shall be checked, the second poured concrete strength of more than 70%. In the process of reaming or boring, apart from the special provisions in factory, does not allow any work that may affect the coupling Centre, such as irrigation, to cylinder connections to flood the condenser pipes and so on. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Mounting bolts should be added lubricants, typing gently with a small hammer, not too loose or too tight, packed the bolts with the corresponding seal screw hole should be marked. 6.4.5.4.2 coupling reamed and pairings is close to the diameter of bolt bearing good hinge holes, dressed with a good two coupling bolts before you can move the rotor, boring-reaming hole in turn. Coupling bolts must be tight coupling is symmetrical diameter, in boring, reaming, two bolts out. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Due to the coupling bolts in accordance with hinge holes corresponding to the diameter of the screw holes one by one after processing, processing back bolt installation location cannot be changed, so according to bolt after the actual weight difference of nut and lock washer to match. General requirements for coupling two symmetrical diameter bolt, nut and lock washers total weight difference should not be greater than 10 g and knocks stamped mark. (See Figure 18) The coupling bolts apply lubricant, and then gently with copper home, not too loose or too tight. Bolt Assembly is finished, symmetrical tightening all bolts to 30%, 50%, 70%, 100% force, and check the coupling