在Word200文档中绘制直线和曲线.docVIP

在Word2010文档中绘制直线和曲线 直线和曲线是构成各种图形的基本形状，Word2010提供了多种直线和曲线类型，包括“直线”、“肘形连接符”、“曲线连接符”、“曲线”和“自由曲线”。打开Word2010文档窗口，切换到“插入”功能区。在“插图”分组中单击“形状”按钮，在“形状”面板中的“线条”分类中可以看到多种线条类型，如图座机电话号码03所示。 图座机电话号码03 Word2010中的线条类型 Word2010“直线”工具可以绘制最简单的线条，单击两个顶点即可绘制一条直线或带有箭头的直线，如图座机电话号码04所示。 图座机电话号码04 绘制直线 Word2010“肘形连接符”工具可以绘制不带箭头、带有单箭头和带有双箭头的直线连接符，同样也是单击两个顶点即可完成。肘形连接符的大小和形状可以通过控制手柄进行调整，如图座机电话号码05所示。 图座机电话号码05 绘制直线肘形连接符 Word2010“曲线连接符”工具可以绘制不带箭头、带有单箭头和带有双箭头的曲线连接符，单击两个顶点即可完成绘制。曲线连接符的大小和曲线角度可以通过控制手柄进行调整，如图座机电话号码06所示。 图座机电话号码06 绘制曲线连接符 Word2010“曲线”工具可以绘制线条平滑的曲线形状，用户需要单击多个顶点完成整条曲线的绘制。选择“曲线”工具后，首先单击起始顶点，然后移动鼠标并单击第二个顶点，接着根据需要单击第三个顶点、第四个顶点……。双击最后一个顶点完成曲线的绘制，所绘制的曲线既可以闭合，也可以非闭合，如图座机电话号码07所示。 图座机电话号码07 绘制曲线 Word2010“自由曲线”工具实质上就是铅笔工具，用户选择“自由曲线”工具后，可以像使用铅笔一样自由绘制线条，如图座机电话号码08所示。 图座机电话号码08 使用“自由曲线”工具 construction work area in the form of conference reviews. 2 review program review date is determined by the project manager; According to the project manager of project quality control Department requires preparation of a management plan, representative of the management audit of the project, approved by the project manager; Review Project Office issued notices of meetings; Project manager facilitates the review meeting, scheduled content under review; Quality control Department is responsible for the records, the preparation of the review report and corrective action plan, representative of the management audit of the project, approved by the project manager; Quality control Department is responsible for the preparation of records and reports the distribution list, or publish to the Internet by engineering part of the project staff and departments. Organized by the quality control Department is responsible for tracking the implementation of corrective measures inspections. 3.4.5 the output from the management review shall include the following elements: the effectiveness and suitability of the quality management system, whether it be maintained and revised; Quality policy and quality objectives are ac