毕业设计正文过目录.docVIP

 目 　录 摘 要 I Abstract II 目 录 ...III 1.引 言 1 2.1工件的形状和尺寸的分析 5 2.2 工件材料的分析 6 2.3 工件的经济性分析 6 3. 工艺方案的确定 6 3.1 工序安排方案 6 3.2该制件工艺卡的确定 7 4. 落料模具设计 7 4.1 排样设计与计算 7 4.2　凸凹模刃口尺寸计算 8 4.3　冲裁力的计算 8 4.4 模具结构设计 9 4.5　模具主要零部件的结构及尺寸设计 9 4.6　压力机的选用 10 4.7 压力中心的确定 11 4.8　冲裁模总装图 11 5. 冲孔拉深复合模具设计 13 5.1 冲压力的计算 13 5.2拉深件的工序安排 14 5.3 冲孔模的凸、凹模工作部分尺寸的计算 14 5.4 拉深模的凸、凹模圆角及工作部分尺寸的计算 14 5.5 冲孔模凸模的设计 15 5.6 拉深模凸模的设计 16 5.7 拉深模凹模的设计 17 5.8 拉深模凸模固定板的设计 17 5.9 拉深模凸模垫板的设计 18 5.10拉深模压料板的设计 19 5.11拉深模凸模固定板的设计 19 5.12压力机的选用 20 5.13 弯曲模装配图 20 6 工艺规程设计 22 6.1 落料凸模工艺规程设计 22 6.1.1 毛坯的制造形式 22 6.1.2 基准面的选择 22 6.1.2 制定工艺路线 23 结　论 25 参考文献 27 谢　辞 26 毕业设计说明书 多孔筒拉深复合模设计 force youth teams and County party leaders, aimed at weakening the anti-Japanese forces. Zhuang Shaozhen was removed from Office and to the underground revolution activities carried out in the country, political parties were dissolved. Zhejiang comrades and thus losing a foothold in Wujiang basis points. To make them stay, jindapeng served as captain of the young workers through activities, make the political player-wise into the youth team. Save a group of the backbone of the resistance, and gave the Communists ... Commander Zhu Xi, led by Deputy Commander Wang Hesong, stationed along the junction of Jiangsu xincheng, Wuzhen. Zhu Xi troops KMT-CCP cooperation and anti-Japanese policy of solidarity, he moved to Jiangsu and Zhejiang provinces. Zhu Department times and day Army hand-to-hand combat made victory, grow has momentum, standing strict Tomb, and new Cheng of appeasement army giant Haru Brigade anyway, received adapted; living Taihu Lake of bin of two a even Hunan army with of allegiance; Jiangsu and Zhejiang junction area of Wang Chunlin Department about 500 people also has done a Yu Zhu Xi men; River, and Zhejiang, and Shanghai area many tour miscellaneous forces also attracted attached return, plus many local youth have joined forces, Zhu Xi strength big increased, from original more than 200 more people quickly development t