自动化专业本科业设计英文翻译.docVIP

自动化专业本科毕业设计英文翻译 学院（部）： 专业班级： 学生姓名： 指导老师： 年 月 日 FOREIGN LITERATURE At present, the main control way in automation field are relay control, microcomputer control and PLC control. Compared with the relay control system and the microcomputer control system, the PLC control system has a series of advantages, such as little work load of designing, installing, wiring and debugging, short cycle of development of working environment and convenient maintenance. Meanwhile, the relay control system has already been few used on the machine control system is inferior in ability of anti-interference, high in requirement of working environment and long in design and developing cycle of the control system. So its application has being on defining trend in the automation control field by year. The electrical control system of z-3040 Radial arm drill has many defects such as complex circuit, high failure rate, large maintenance workload, poor reliability and flexibility. This paper introduces the z-3040 Radial arm drill relay contact analog control system reformation with PLC to guarantee the rapidity, accuracy and rationality of electric control system. It satisfied real production demand and enhance the economic benefit.The original was introduced initial controller of programmable distinguishing feature and performance. Analyses on z-3040’s Radial arm drill technique property and the work cycle distance travelled by a stream of water base, expounded the initial controller of application ES’s set programmable carrying on the technological transformation system design to such, and finish come out the control procedure trapezium picture. What is a PLC control system? Since the 1960s the United States to launch programmable logic controller (Programmable Logic Controller, PLC) to replace conventional control devices since the relay, PLC has been rapid development in various parts of the world have been widely used. At the same time, PLCs function