VM安装Linx的全程图解教程4.docVIP

VM安装Linux的全程图解教程4 本文由：xp系统下载提供技术支持 继续选择软件，如果你刚才没有安装自己喜欢的软件，这里还可以再安装。 安装完毕后-结束设置！ 好了，系统安装好了，也是指完毕了，可以登陆了。用户名：root 密码：安装系统前设置的根口令。别忘了安装这个优化程序， 单击安装VMware Tools后，Linux桌面出现一个光驱，双击打开后有两个，根据你的系统选择，双击—继续安装就行了。 怎么手动设置我的IP地址呢？ 应用程序—系统工具—网络设备控制器。然后单击配置---编辑：选择静态IP地址设置，然后填写，确定。 也可以自动获得IP地址。 然后再单击“激活”当状态里的“不活跃”变成“活跃”后就可以了。 怎么查看IP信息呢？桌面—右键---打开终端---输入“ifconfig”注意，不是“ipconfig” 到此结束了，你可以去安装你的虚拟机了，以上内容有何不足或错误的地方请指出并联系我，谢谢。应用方面自己多研究研究吧，关于虚拟机的网络类型里的几项，我也不是很清楚怎么去弄，因为根本就识别不了我的网卡，所以就不多做介绍了。如果你的是8139的网卡的话，是可以认到的。下次准备做个下Linux的高级应用NFS服务器的配置教程。因为我在网上看了很多NFS方面的问题，但是实际操作当中遇到了很多问题。。。头疼死我了。。++++++++++++++++++++++++++++以下是LZ提供的图片，全部上传[s:460]  提供技术支持 coupling Centre shall be checked, the second poured concrete strength of more than 70%. In the process of reaming or boring, apart from the special provisions in factory, does not allow any work that may affect the coupling Centre, such as irrigation, to cylinder connections to flood the condenser pipes and so on. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Mounting bolts should be added lubricants, typing gently with a small hammer, not too loose or too tight, packed the bolts with the corresponding seal screw hole should be marked. .2 coupling reamed and pairings is close to the diameter of bolt bearing good hinge holes, dressed with a good two coupling bolts before you can move the rotor, boring-reaming hole in turn. Coupling bolts must be tight coupling is symmetrical diameter, in boring, reaming, two bolts out. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Due to the coupling bolts in accordance with hinge holes corresponding to the diameter of the screw holes one by one after processing, processing back bolt installation location cannot be changed, so according to bolt after the actual weight difference of nut and lock washer to match. General requirements for coupling two symmetrical diameter bolt, nut and lock washers total weight d