采矿工程CAD定义采区边界线.docVIP

采矿工程 用CAD自定义 采区边界线 各步骤意义和注意事项请参考我前面讲过的井田边界线 网址： /view/97e24819cc7931b765ce15a6.html 先介绍下采区边界线，如下图: 标注说明如下： 我们可以用前面井田边界线的方法（/view/97e24819cc7931b765ce15a6.html） 我们也可以直接用CAD中自定义简单线性； 这里我只介绍自定义简单线性 步骤如下： 在桌面鼠标点击右键新建文本文档 将文档从新命名为采区边界线和修改后缀为LIN 点击“是” 出现如下图标 打开文档 ，在文档中编辑如下内容并保存： 这样我们就自定义完了 我们检验是否成功 打开CAD在格式线性中加载 采区边界线 并置当前 如上图 点击加载 点击文件 找到采区边界线文件位置 再点击打开 出现下图 选中 采区边界线 点击确定 出现下图 选中 采区边界线 点击当前 再点击确定 然后就是 见证成败的时候了 我们点击绘图直线 就出现了我们所要的了 采区边界线用自定义简单线性的方法就到此结束，以后我将介绍用利用expresstools工具制作和采矿工程的其他线性要求和画法。 and performance test copies of the record. If necessary, review should be carried out; 4 for spring hangers included simple spring, hangers and constant support hangers it should also be recognized as setting and locking of loads. 5 check the surface quality, folded layering and without cracks, rust and other defects. 5 after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust torque limit requirements; increase the stabilit