CentOs命模式配置网络.docVIP

第一步：查看网络MAC地址 cat /etc/udev/rules.d/70-persistent-net.rules 在出现的界面中可以看到所有的网卡名称和MAC地址，如下图中的addres 和 name 备注：如果是虚拟机需要先在设置中配置网卡，配置的方案有好几种，下面列举两种方案 方案一：只配置一个“桥接网卡”，在配置界面中就会显示出网卡的MAC地址。如下图所示 方案二：配置两张网卡，连接方式一个选NAT（用于CentOS中共享外部网络），一个选Host-only （用于外部链接CentOS） 第二步：配置 1、使用以下命令 vi /etc/sysconfig/network-scripts/ifcfg-eth0 2、在出现的vi编辑界面中，按insert进入编辑插入模式 1 如果是想动态获取IP则加入以下内容 DEVICE eth0 HWADDR 08:00:27:43:35:86 TYPE Ethernet ONBOOT yes NM_CONTROLLED yes BOOTPROTO dhcp 如果是想设置固定的IP则加入以下内容 DEVICE eth0 HWADDR 08:00:27:43:35:86 TYPE Ethernet ONBOOT yes NM_CONTROLLED yes BOOTPROTO static IPADDR 192.168.100.77 GATEWAY 192.168.100.1 DNS1 61.139.2.69 DNS2 8.8.8.8 DEFROUTE YES IPV4_FAILURE_FATAL yes IPV6INIT no 备注： eth0,要根据实际情况来定，如上一步骤中你要选择配置的网卡名为eth2，则这里应该写成eth2 如果是虚拟机，则有时还需要使用命令”ifconfig 网卡名”来查看是否是有效的网卡 如果想配置另外的网卡，则需要配置多个类似的文件 连按两次esc，并输入”:wq”或”ZZ”命令退出vi编辑 第三步：重启网卡服务，并查看网络配置 重启网卡服务 service network restart 查看网络配置 使用命令： ifconfig enforced thermal insulation starts checking system, issued by the thermal insulation construction before you start to notice, transfer inspection of upper and lower operation and transfer of records. For outdoor operation, pipeline equipment to effectively carry out the insulation waterproof measures fail to install protective panels in part with three tarpaulin cover, to prevent insulation from moisture. Insulation seam Michael Jackson 5mm, joints, joints 100mm, insulation thickness tolerance +10MM~ – 5mm , appropriate material elastic banding, spacing according to the design requirements, rigid insulation soft materials for construction joints tight; And large-diameter vertical pipe for high temperature pipeline in strict accordance with design drawings called for the establishment of expansion joints and holding bracket; Design requirements into a removable type of insulation, in strict accordance with specifications disconnect from the other insulation; Surface insulation boards in the technology of plastering construction of woven cloth to prevent pol