C8051F在KIL(UV4)和新华龙电子下的烧录配置.docVIP

以下内容为C8051在keil环境下和电子（官方烧写）软件下的配置步骤，帮助大家快速上手将程序单片机吐血总结，一定好用！ 一．C8051F开发环境之Keil 下图是开发环境界面。 使用Keil C51的话，则需要安装C8051F系列单片机的调试驱动程序。这个程序可以在Silabs的官方网上下载。SiC8051F_uVision_v3.21.zip或者更新的版本。在安装这个程序前需要先安装Keil C51. 然后把上述文件安装到Keil C51所在的目录。 安装完毕后，任意打开C51的一个工程（如开发板工程Source Code\LED_Flow\project）,先进行一系列的设置。如下所示： 第一步：在Project 菜单下面选择Option for Target “xxxxxx” 第二步：点击后打开选项对话框，在Debug选项卡上，选择如下图所示。 如果没有，则需要在网上下一个SiC8051f.dll“目标路径\C51\BIN”，然后在目标路径中有一个名为TOOLS文件，在其中加一行 TDRV9(，看情况)=BIN\SiC8051F.DLL (Silicon C8051X)这样应该就好了。 如果图中的选项，烧写器的驱动文件新华龙电子，也就是烧写软件目录下）中“USBHID.dll”目标路径”下 最好选择OK确认，Keil C51 调试和烧写环境就配置好了。 我们以开发板的Source Code\LED_Flow\project为例，打开后 第一步：按Rebuild all target files重新编译整个工程。 第二步：用C2调试器连接开发板，上电，点击Keil　C51的Start/Stop Debug Session. 如果没有问题的话，将弹出烧写FLASH的窗口： 二、官方烧写软件的6中文下载程序 2、进行烧录端口配置：1）点菜单栏的选择：得到： 确保调试接口类型为C2，选择‘USB系列’！ 3、烧录步骤：见图中所示 烧录完毕后退出！ well, with the effectiveness of services to defend the interests of the masses. Third, we should strive to do well. To achieve good practical results, the key is to know the law, to grasp the laws and using laws. Office of economic development, social progress, there are rules to follow. Only act according to the law, to overcome blindness and strengthening initiative, creative. Working in the Office, we should be good at analyzing the essence of things, to find regular thing, change from passive to active, to seek one. Investee 2. establishment of evaluation system. Evaluation system is essentially an incentive mechanism, the evaluation was objective and fair, reasonable, and can stimulate a persons energy, mobilizing peoples enthusiasm or be misleading, dampened the enthusiasm of people. At present, the concept of people-oriented people, but to establish and perfect evaluation system is still lagging behind. Work in this area should be seriously caught up. Three emphasis on to take advantage of. Is a focus on standards and scientific. A fundamental point of the evaluation criteria, is to keep contact, development