Masterca期末复习题目.docVIP

Mastercam期末复习题目 请根据给出的条件分别构建相应的零件曲面，并根据零件的具体要求进行工艺分析、确定工艺方案：如毛坯尺寸、加工工序、各加工方式相适应的刀具、加工参数等，最后生成刀具路径及路径模拟。 1、凹模曲面 2、控制旋钮及线框尺寸： 3、凹模零件： 4、凹模曲面线框 5、凸模 6、草莓曲面及线框： 7、可乐瓶底座曲面及线框尺寸： 已知：圆弧1为起点在（58,0）） 说明：圆弧1为半径80，起始角度45，终止角度135，圆心在（0,-80） well, with the effectiveness of services to defend the interests of the masses. Third, we should strive to do well. To achieve good practical results, the key is to know the law, to grasp the laws and using laws. Office of economic development, social progress, there are rules to follow. Only act according to the law, to overcome blindness and strengthening initiative,