急诊病房护士胜力调查问卷.docVIP

急诊病房护士胜任力及职业认同的调查研究 层级 姓名 科室 亲爱的各位护理同仁： 您好！感谢您在百忙之中填写此问卷，这是，调查包括部分：。本问卷匿名填写，您填写的资料我们将严格保密，数据仅用于此研究。请您根据自己的情况如实填写，对您给予的支持与合作表示衷心的感谢！ 一般情况问卷 填写。 性别：男 女 ： 婚姻状况：未婚 已婚 ④丧偶 若有子女，子女状况：①婴幼儿 ②学龄期 ③初、高中 ④大学及以上 初学历：中专 大专 本科 研究生 最高学历：中专 大专 本科 研究生及以上 职称：护士 护师 主管护师 副主任护师及以上 职务：无 护士长 科护士长 护理部主任 用工形式：事业编制 人事代理 聘用制是否为科室带教：是 否 是否为科室：是 否 参加工作：年 填表说明：请您仔细阅读下面每一项目，并确定您在该项目的胜任力水平，然后在相应的数字栏内上打。针对每一个问题，都按照5个等级进行评定：4＝很有能力，3＝有足够的能力，2＝有一些能力，1＝有一点能力，0=没有能力。 coupling Centre shall be checked, the second poured concrete strength of more than 70%. In the process of reaming or boring, apart from the special provisions in factory, does not allow any work that may affect the coupling Centre, such as irrigation, to cylinder connections to flood the condenser pipes and so on. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Mounting bolts should be added lubricants, typing gently with a small hammer, not too loose or too tight, packed the bolts with the corresponding seal screw hole should be marked. 6.4.5.4.2 coupling reamed and pairings is close to the diameter of bolt bearing good hinge holes, dressed with a good two coupling bolts before you can move the rotor, boring-reaming hole in turn. Coupling bolts must be tight coupling is symmetrical diameter, in boring, reaming, two bolts out. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Due to the coupling bolts in accordance with hinge holes corresponding to the diameter of the screw holes one by one after processing, processing back bolt installation location cannot be changed, so according to bolt after the actual weight difference of nut and lock washer to match. General requirements for coupling two symmetrical diameter bolt, nut and lock washers total weight difference should not be greater than 10 g and knocks stamped mark. (See Figure 18) The coupling bolts apply lubricant, and then gently with copper home, not too loo