2015年4月马克思主义基本原理概论(马克思03709)试题及答案实拍完整版.docVIP

2015年4月自考马克思主义基本原理概论（马克思03709）试题及答案实拍完整版 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal t