高中物理基本知以及高考中所占分值.docVIP

高考物理考点分析 分值分布：力学占物理高考总分值的50%、电磁学占30%、光热占20%。 运动的描述、几种力、几种运动 一 基本的力（前期力的分析是基础） 1 重力 2 弹力 3 摩擦力 4安培力 5洛伦兹力 6 万有引力 二 物体的平衡 （正交分解、三角形法则） 共点力平衡条件的应用 （对力的分析要到位） 三 运动的描述(基础) 1 质点参考系和坐标系 2 时间和位移，速度 ，加速度 4 实验：用打点计时器测速度 四 牛顿运动定律 （三大定律） 1 牛顿第一定律 2 实验：探究加速度与力、质量的关系 3 牛顿第二定律 4 牛顿第三定律 5用牛顿定律解决问题（一） 6 用牛顿定律解决问题（二 coupling Centre shall be checked, the second poured concrete strength of more than 70%. In the process of reaming or boring, apart from the special provisions in factory, does not allow any work that may affect the coupling Centre, such as irrigation, to cylinder connections to flood the condenser pipes and so on. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Mounting bolts should be added lubricants, typing gently with a small hammer, not too loose or too tight, packed the bolts with the corresponding seal screw hole should be marked. 6.4.5.4.2 coupling reamed and pairings is close to the diameter of bolt bearing good hinge holes, dressed with a good two coupling bolts before you can move the rotor, boring-reaming hole in turn. Coupling bolts must be tight coupling is symmetrical diameter, in boring, reaming, two bolts out. Well boring, hinge bolt hole flange with coupling of vertical, not oblique. Due to the coupling bolts in accordance with hinge holes corresponding to the diameter of the screw holes one by one after processing, processing back bolt installation location cannot be changed, so according to bolt after the actual weight difference of nut and lock washer to match. General requirements for coupling two symmetrical diameter bolt, nut and lock washers total weight difference should not be greater than 10 g and knocks stamped mark. (See Figure 18) The coupling bolts apply lubricant, and then gently with copper home, not too loose or too tight. Bolt Assembly is finished, symmetrical tightening all bolts to 30%, 50%, 70%, 100% force, and check the coupling flutter and before connecting the cir