微压指挥器型压调节阀.docVIP

微压指挥器型压力调节阀 一、概述： 二、主要技术参数： 三、外形尺寸与重量： 四、应用典列： ? 订货须知：一、①微压指挥器型压力调节阀产品名称与型号②微压指挥器型压力调节阀口径③微压指挥器型压力调节阀是否带附件二、若已经由设计单位选定公司的微压指挥器型压力调节阀型号，请按微压指挥器型压力调节阀型号三、当使用的场合非常重要或环境比较复杂时,请您尽量提供设计图纸和详细参数， ? ? ? 相关产品： 电动对夹衬胶蝶阀 电动隔膜阀 英标气动隔膜阀 角座阀 电动三通调节球阀 电动调节球阀 ZZYP自力式压力调节阀 ZXHP不锈钢气动薄膜阀 ZXM气动薄膜套筒调节阀 ZXGV气动薄膜笼式单座阀 ZZC不锈钢自力式压力调节阀 SMJ641H/W气动不锈钢截止阀 ZZY蒸汽型自力式压力调节阀 ? appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6