教你如何扎出简亮的发型.docVIP

步骤:1、将头发梳成一个马尾。2、将头发分成“喷泉”状，向四周打开。3、分段将它们用卡子一部分一部分卡起来。二，日系蓬松大发髻Step1将全部的头发紧紧扎起来到头顶较高的位置，绑成马尾。Step2.轻轻地扭转马尾，让头发松松的绕成圆弧形，并用发夹固定。Step3最后将发尾向发髻内收好，用发夹固定，即完成。Tips收发髻的原则想要做出具有蓬松感的大发髻，最重要的就是抓头发时「要轻」且「松松」地抓，即使有头发没抓到滑落也不用紧张．韩式扎头发diy发型韩式扎头发diy发型－大豆发型戴帽子时候可以梳的帽子用法IZZ5G头发稍短的MM~这样弄典型的发卡款下面来点华丽的吧。。。下载次数:05 天前 09:0012.jpg(87.22 KB)下载次数:05 天前 09:00 收起全文↑ 阅读原文 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not