机械设计课程设—展开式二级圆柱斜齿轮减速器.docVIP

机械设计课程设计 计算说明书 设计题目：带式运输机传动装置 黑龙江大学机电工程学院 2009级机械设计制造及其自动化二班 设计者：张顺平 指导老师：高树枚 2011年12月 （此文档为插入图片形式，打开请耐心等待） appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge w