CoFe2O4米线的制备与表征.docVIP

  • 6
  • 0
  • 约1.64万字
  • 约 11页
  • 2016-10-15 发布于广东
  • 举报
CoFe2O4米线的制备与表征

摘 要: 利用阳极氧化铝(AAO)模板,运用电化学沉积法,并通过后期的氧化处理,获得了CoFe2O4纳米线。X射线衍射显示,纳米线为无晶粒取向的尖晶石结构。从电子显微镜照片可以看出,沉积得到的CoFe2纳米线很疏松,空气氛下的热处理使之转化为致密的CoFe2O4纳米线。扩孔时间40分钟所得纳米线阵列的矫顽力最大,为1.9 kOe(测量磁场平行于纳米线)。 关键词: AAO模板;CoFe2O4纳米线;矫顽力 Abstract: By electrodeposition method and further oxidization, CoFe2O4 nanowire arrays within anodic aluminum oxide (AAO) templates were obtained. The XRD result proved that the phase structure of the nanowires is cubic spinel-type, and they exhibit no preferred crystallite orientation. The TEM images showed that, the CoFe2 nanowires electrodeposited within the t

文档评论(0)

1亿VIP精品文档

相关文档