Awxlxr208年项目部工作总结.docVIP

生命是永恒不断的创造，因为在它内部蕴含着过剩的精力，它不断流溢，越出时间和空间的界限，它不停地追求，以形形色色的自我表现的形式表现出来。－－泰戈尔完成工程项目及产值在下半年，经过和的多方努力，终于拿下了，本工程自10月日开工，目前2009年工作目标?2008年是值得我们庆贺的一年，但这即将成为历史；200年是充满希望的一年，她正迈步向我们走来。200年是建筑市场正式打开局面的一年，建筑市场的机遇将来临，就我们而言，加强企业管理，提高各项目经理部的生产竞争能力势在必行就项目而言，除了继续的施工外，还积极运作2009年兴建的工程我继续发扬质量方针、环境方针、安全方针，在社会群众中树立我良好形象，为我们在将来的市场竞争中贡献自己的一份力量！ spacing of 100mm. C, line line line nearby. D, spare wire unified terminal strip Terminal (terminal strip at the top of the vertical, horizontal terminal strip from the harness to Terminal Pai end at the beginning), length to ensure as far as Terminal and set aside. After e, form a wire harness, cable, line. When the line should be in the core wire for better identification and marking on the cards will be prepared in advance, alternate core core content for the cable numbering. F, finish line, according to the corresponding terminal locations, wire one by one from the bunch out, pulling line, should be kept parallel to each other and more. Core dark as possible, determined in accordance with specific conditions, it is required that: neat, beautiful, shapely, pleasing to the eye. 7.6.2 wiring technology, out of the core wire according to Terminal position, cut off the excess, with wire stripping pliers or electrician knife stripped of insulation, so that connection. Stripping should not damage the copper core. B, core wire on the oxide and chip-insulated electricians knife scrape. C, core processing has been completed, thread round long nose pliers in a clockwise direction. Circle with the screw in the direction of spin in the same direction, circle should be appropriate, it is best to slightly larger than the screws, bent round the circle and the length of root and appropriate so set screw is screwed on tight. D, when on the crimp-type terminals when wiring, threads do not have to bend. Insulating part should be careful not to press it into a Terminal, and make the loop doesnt make sense and to prevent bad head crimping, fell down, caus