DivX立体编指南.docVIP

立体编码指南DivX This guide has been superseded by the本指南已经被取代的Stereoscopic Encoding Guide for Windows Media立体编码指南为Windows媒体! Content内容 Introduction介绍 Lets Start让我们开始 Audio Settings音频设置 Video Settings视频设置 Encoding编码 Bitrates比特率 Introduction介绍 This guide explains how to encode stereoscopic video files for playback using本指南说明了如何编码立体视频文件进行播放使用Stereoscopic Player立体球员or other software players. 或其他软件厂商。I assume you have already edited the video in some video editing application and want to compress it efficiently now.我假设您已经编辑了视频在一些视频编辑应用程序,想要有效地压缩它现在。 First, we have to decide which codec we want to use. 首先,我们必须决定我们想要使用的编解码器。Since there is no free stereoscopic video codec available, we have to use one of the ordinary codecs available. 由于没有免费的立体视频编解码器可用,我们必须使用一个普通的编解码器可用。Currently, the most commonly used codecs are DivX and Windows Media. 目前,最常用的编解码是DivX和Windows媒体。This guide explains how to use the DivX codec only.本指南解释了如何使用DivX编码只。 Required software:所需的软件: DivX Pro 5.1DivX Pro 5.1or newer version或更新的版本 VirtualDub影视剪辑快手 I wrote this guide using VirtualDub, however you can export directly to DivX format from most video processing applications. 我写这篇指南使用影视剪辑快手,但是你可以直接向DivX格式导出从大多数视频处理应用程序。By the way, most of the statements in this guide also apply to monoscopic video compression.顺便说一下,大部分的声明在本指南也适用于monoscopic视频压缩。 Lets Start让我们开始 First, run Virtual Dub and open your stereoscopic video file (File-Open video file). 首先,运行虚拟配音,打开你的立体视频文件(文件- 开放视频文件)。Make sure your video uses side-by-side or above/below layout, because interlaced layout will cause strong ghosting, even when the interlaced-option in DivX is used. 确保你的视频使用并排或高于[低于]布局,因为交错的布局将引起强烈的影,甚至当交错的选项是使用DivX。Any other layouts are not recommended too, because they are not supported by most player applications, including Stereoscopic Player. 任何其他的布局也不推荐,因为他们不支持大多数球员应用程序,包括立体球员。The source file should be only slightly compressed, or even better, uncompressed (or compressed using a lossless codec) to get best results. 源文件应该只稍扁,甚至更好,