photoshp利用纹理素材制作漂亮的溶图效果.docVIP

利用纹理素材制作漂亮的溶图效果 来源：网页教学网 作者：不详本教程介绍一些基础的溶图方法。在溶图之前作者非常巧妙地把人物轮廓的暗部线条制作出来，这样溶图后画面清晰很多。溶图的方法有很多大家也可以尝试一下其它方法。原图 最终效果 1、打开人物素材，复制图层，并隐藏复制层。 2、选择图层0，执行：滤镜 模糊 特殊模糊。 3、选择 色彩范围，选择黑色。 4、删除，反选（Ctrl + Shift +I），编辑 填充，用黑色填充。 5、添加图层，并导入背景素材。 6、选择图层0，填充属性设为“70%”。 7、显示图层1，并添加图层蒙版。 8、选择渐变工具，并按下图设置。 9、按图示方向设置渐变。 得到如下效果： 适当的裁剪下大小，完成最终效果： spacing of 100mm. C, line line line nearby. D, spare wire unified terminal strip Terminal (terminal strip at the top of the vertical, horizontal terminal strip from the harness to Terminal Pai end at the beginning), length to ensure as far as Terminal and set aside. After e, form a wire harness, cable, line. When the line should be in the core wire for better identification and marking on the cards will be prepared in advance, alternate core core content for the cable numbering. F, finish line, according to the corresponding terminal locations, wire one by one from the bunch out, pulling line, should be kept parallel to each other and more. Core dark as possible, determined in accordance with specific conditions, it is required that: neat, beautiful, shapely, pleasing to the eye. 7.6.2 wiring technology, out of the core wire according to Terminal position, cut off the excess, with wire stripping pliers or electrician knife stripped of insulation, so that connection. Stripping should not damage the copper core. B, core wire on the oxide and chip-insulated electricians knife scrape. C, core processing has been completed, thread round long nose pliers in a clockwise direction. Circle with the screw in the direction of spin in the same direction, circle should be appropriate, it is best to slightly larger than the screws, bent round the circle and the length of root and appropriate so set screw is screwed on tight. D, when on the crimp-type terminals when wiring, threads do not have to bend. Insulating part should be careful not to press it into a Terminal, and make the loop doesnt m