xx区中心镇创达标工作汇报.docVIP

XX区中心镇创建达标工作汇报 中共XX区委 XX区人民政府 （2011年4月日） 去年4月10日全市中心镇创建达标动员会之后，区委、区政府按照市委、市政府的统一部署，将中心镇建设作为统筹城乡发展的重要途径，举全区之力，紧紧围绕“全市争第一、苏北争一流”的目标定位，突出重点，加大力度，扎实深入开展中心镇创建工作。全市30个重点创建镇中，有我区yy、qsq两个镇，经过一年努力，我区中心镇建设取得了一定成效，现将有关情况汇报如下。 一、高度重视创建中心镇工作 区委、区政府高度重视中心镇创建工作，及时传达了市委、市政府有关精神，并先后召开了区委常委会、区政府常务会进行专题研究，认为这是XX建设城乡统筹示范区的难得机遇，全区上下把中心镇创建作为促进XX城乡协调发展的重要任务，全力以赴抓紧抓好。 一是加强组织领导。按照全市动员会部署要求和曹书记讲话精神，我区成立了区中心镇创建达标工作领导小组，由区政府主要负责人任组长，区委、区政府分管负责人任副组长，区有关部门负责人为领导小组成员，纺织、冶金、煤化工、新能源四大主导产业纺、冶金、焦电三大产业集聚区 spacing of 100mm. C, line line line nearby. D, spare wire unified terminal strip Terminal (terminal strip at the top of the vertical, horizontal terminal strip from the harness to Terminal Pai end at the beginning), length to ensure as far as Terminal and set aside. After e, form a wire harness, cable, line. When the line should be in the core wire for better identification and marking on the cards will be prepared in advance, alternate core core content for the cable numbering. F, finish line, according to the corresponding terminal locations, wire one by one from the bunch out, pulling line, should be kept parallel to each other and more. Core dark as possible, determined in accordance with specific conditions, it is required that: neat, beautiful, shapely, pleasing to the eye. 7.6.2 wiring technology, out of the core wire according to Terminal position, cut off the excess, with wire stripping pliers or electrician knife stripped of insulation, so that connection. Stripping should not damage the copper core. B, core wire on the oxide and chip-insulated electricians knife scrape. C, core processing has been completed, thread round long nose pliers in a clockwise direction. Circle with the screw in the direction of spin in the same direction, circle should be appropriate, it is best to slightly larger than the screws, bent round the circle and the length of root and appropriate so set screw is screwed on tight. D, when on the crimp-type terminals when wiring, threads do not have to